Red Dragon® 3 Speedy 80 Watt / 2.113 gph / 10V connection

Red Dragon® 3 Speedy 80 Watt / 2.113 gph / 10V connection
For a larger view click on the thumbnail
Red Dragon® 3 Speedy 80 Watt / 2.113 gph / 10V connection
Red Dragon® 3 Speedy 80 Watt / 2.113 gph / 10V connection
Red Dragon® 3 Speedy 80 Watt / 2.113 gph / 10V connection
Red Dragon® 3 Speedy 80 Watt / 2.113 gph / 10V connection
903.07 USD
Add to cart

Shipping time: Backorder (En Route) Backorder (En Route)
Product no.: 604


Products description

Red Dragon® 3 Speedy pump 80 Watt / 8,0m³ / 2.113 gph  with AKB anti-lime-bypass

Technical data  Red Dragon® 3 Speedy pump 80 Watt  2.113 gph (8,0 m³):
80 Watt/h // max. 204.7" (5,2 mtr.) pressure height
speed adjustable Brushless DC pump
Watt-Display in 5 Watt-steps adjustable
intake side Ø 2′′ (50 mm) - pressure side Ø 1 1/4′′  (32 mm)
operating voltage: 110 Volt 60 Hz  (also in 230V/50Hz available)
Protection class pump: IP 68  control unit: IP 66  
Weight pump: 3,4 kg
Weight controller: 1,1 kg
Height of intake side: center 2.76′′ (70 mm)
Dimension pump:
5.12" wide / 9.25" length / ~ 7.48" height
130 mm wide / 235 mm length / ~ 190 mm height
Dimension control unit:
5.51" wide / 7.48" length / ~ 2.76" height
140 mm breit / 190 mm length / ~ 70 mm height

pdf_icon  Data_sheet_and_spare_parts.pdf   pdf_icon  Operating_and_maintenance_manual.pdf 

  • Saltwater resistant M6 grade 2 titanium screws
  • Saltwater resistant parabolic rubber feet for acoustic decoupling
  • Extreme low noise brushless dc-delivery pump with grouted power electronics
  • High efficient technology "Made in Germany"
  • Inlet and Outlet complete with DIN connection, compact dimensions
  • High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
  • Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
  • Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
  • Heavy and massive craftsmanship against vibrations and oscillation
  • CE conformity, developed and built according to VDE guidelines

 /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Use as a circulation pump is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.

Available soon an additional controller, for the connection to the computer, costs approx. 170.28$ (incl. all connection cables and main adaptor)

Tested so far folowing these two computers:
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.

The pulsing is in 5s intervals possible.

Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.

If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W 1,5V = 20W 2V = 25W….. 7,5V = 80W.

At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.


This Product was added to our catalogue on 31/07/2014.

Quick purchase

Please enter the article no. from our catalogue.

Welcome back!
Shipping country